Fancomkish as an Iranian technology based company is active in field of providing ICT solutions and products for enterprise customers such as Oil & Gas, Bank, etc. Fancomkish is dealing with several most leading ICT global suppliers.

Get In Touch

No.3, 6th alley, sabunchi St., Shahid Beheshti St., Tehran,Iran
Fax: +9821 88536919
Phone: +9821 96861740-5
Postal Code : 1533655513
Home  /  Wifi  /  Outdoor Access Points  /  AP6510DN-AGN Access Point
FanCom Kish 2-1-100x100  fancomkish

AP6510DN-AGN Access Point

The AP6510DN-AGN is an enhanced series dual-band Access Point (AP).With a high level of physical protection, it is applicable to pedestrian areas, factories, and other challenging environments, meeting the outdoor network deployment requirements.

this product was shared 0 times
  • توضیحات
  • characteristic


 FanCom Kish 253757-1  fancomkish


FanCom Kish 253757-2  fancomkish

1. ETH/PoE interface: a 10/100/1000M interface, which connects to the wired Ethernet and supports the PoE power supply.

2. Default button: restores the factory settings if you remove the screw and hold down the button more than 3s from the hole.

FanCom Kish 253757-3  fancomkish

3. Ground port: connects to a ground cable to ground an AP..

FanCom Kish 253757-4  fancomkish

4. 2.4 GHz antenna port..

FanCom Kish 253757-5  fancomkish

5. 5 GHz antenna port..



Highly reliable wireless access

  • Complies with IEEE 802.11a/b/g/n.
  • Supports 2×2 MIMO and provides a maximum rate of 600 Mbit/s.
  • Supports Wi-Fi Multimedia (WMM) and priority mapping on the air interface and wired interface.
  • Supports wired link integrity check.
  • Supports load balancing.
  • Supports roaming without service interruption in Fit AP mode.
  • Supports AC dual-link backup and VRRP hot backup in Fit AP mode.
  • Supports 11n beamforming.
  • Uses the latest 802.11n chip to provide higher performance and wider coverage.
  • Uses a metal shell and heat dissipation design to ensure high reliability.

 Comprehensive user access control capability

  • Supports access control lists (ACLs) and implements user access control based on the user group policy.
  • Provides fine-grained bandwidth management for each user.
  • Supports user isolation policies.
  • Supports unified authentication on the AC in Fit AP mode.
  • Identifies the device type according to the organizationally unique identifier (OUI) in the MAC address, user agent (UA) information in an HTTP packet, and DHCP options in Fit AP mode.
  • The RADIUS server delivers packet forwarding, security, and QoS policies according to the device type carried in the RADIUS authentication and accounting packets in Fit AP mode.

 High security

  • Open system authentication
  • WEP authentication/encryption
  • WPA/WPA2-PSK authentication and encryption
  • WPA/WPA2-802.1x authentication and encryption
  • WAPI authentication and encryption
  • Supports wireless intrusion detection system (WIDS), including rogue AP and STA detection, attack detection, STA/AP blacklist and whitelist.

 Flexible networking and environment adaptability

  • Provides flexible networking capabilities and applies to various application scenarios. Mesh and WDS scenarios are supported only in Fit AP mode.
  • Has strong environment adaptability. The AP can automatically select the transmission rates, channels, and transmit power to adapt to various radio environments and avoid interference in real time.
  • Adjusts bandwidth allocation based on the user quantity and environment to improve user experience.
  • Supports the MIMO antenna system and connects to external dual-band antennas (2.4 GHz and 5 GHz). The antennas can be flexibly adjusted.
  • Identifies interference sources such as bluetooth devices, microwave ovens, cordless phones, ZigBees, game controllers, 2.4 GHz/5 GHz wireless video and audio devices, and baby monitors in Fit AP mode and works with eSight to locate interference sources and display spectrums.

 Simple device management and maintenance

  • Automatically goes online and loads the configuration, and supports plug-and-play (PnP) in Fit AP mode.
  • Supports batch upgrade.
  • Allows real-time monitoring on the network management system (NMS) to facilitate remote configuration and fast fault location.
  • Supports the Link Layer Discovery Protocol (LLDP) to implement automatic link discovery and obtain the network topology.

 High reliability and protection level

  • Provides strong hardware protection capability.
  • Adapts to a wide temperate range from -40°C to +60°C.
  • Uses industry-standard components and design methods, improving industry-level reliability.
  • Provides IP67 protection level.
  • Has a built-in 5 kA feeder surge protector and requires no external surge protective devices, which simplifies installation and lowers costs.
  • Provides 6 kA or 6 kV surge protection capability on an Ethernet interface.